3004 H34 aluminum coil is an AL-Mn series alloy, which is the most widely used type of rust-proof aluminum.
Description
3004 H34 aluminum coil is an AL-Mn series alloy, which is the most widely used type of rust-proof aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum) and cannot be strengthened by heat treatment. Therefore, cold working method is used to improve its mechanical properties: It has high plasticity in the annealed state, good plasticity in semi-cold hardening, low plasticity in cold hardening, good corrosion resistance, good weldability, and poor machinability. Uses are mainly used for low load parts that require high plasticity and good weldability, such as mailboxes, gasoline or lubricating oil pipes, various liquid containers, and other small load parts made by deep drawing.
3004 aluminum coil and strip are mainly used in chemical product production and storage devices, sheet metal processing parts, building materials, building baffles, cable ducts, sewers, various lighting components, beverage cans, wave plates, building materials, colored aluminum plates, and electric lamp heads.
Width(mm) | 20-2600 |
Thickness(mm) | 0.2-12 |
Alloy No. | 3004 |
Temper | H34 |
ID | 76mm,152mm,200mm,300mm,505mm |
Packing | Export wooden pallets, wooden case |
MOQ | 5tons for each thickness |
Payment terms | LC,TT |
Delivery time | 20 days after 30% TT payment or receiving L/C copy |
Data sheet --Chemical analysis
| CHEMICAL ANALYSIS (wt %) ≤ | |||||||||||
ALLOY | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | OTHER IMPURITIES | Al | |
PER | TOTAL | ||||||||||
3004 | 0.3 | 0.7 | 0.25 | 1.0-1.5 | 0.8-1.3 | / | 0.25 | / | 0.05 | 0.15 | The rest |
Data sheet --Mechanical characteristics
| MECHANICAL CHARACTERISTICS > | ||||
Temper | SIZE(MM) | TENSILE STRENGTH (M/PA) | YIELD STRENGTH (M/MP) | ELONGATION ( % ) |
H34 | >0.2-0.5 | 220-265 | 170 | 3 |
>0.5-1.5 | 4 | |||
>1.5-3.0 | 4 | |||
Kind attention : Specifications can be customized as the customer's requirements.