The 6005 aluminum sheet is an Al-Mg series alloy sheet, which is the most widely used type of rust-proof aluminum.
Description
Width(mm) | 20-2600 |
Thickness(mm) | 0.3-300 |
Alloy No. | 6061,6063,6082,6005 |
Temper | O,T42,T62,T4,T6 |
Length(mm) | 20-12000 |
Packing | Standard seaworthy export packaging. Wooden pallets with plastics protection for the plate and sheet. |
MOQ | 5 tons for each thickness |
Payment terms | TT/LC |
Delivery time | 30 days after 30% TT payment or receiving L/C copy |
Scope
The 6005 aluminum sheet is an Al-Mg series alloy sheet, which is the most widely used type of rust-proof aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. It has good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished.
Application
6005 aluminum sheet is mainly used for low-load parts that require high plasticity and good weldability, such as mailboxes, gasoline or lubricating oil pipes, various liquid containers, and other small-load parts made by deep drawing.
Chemical Compositions
CHEMICAL ANALYSIS (wt %) ≤ | |||||||||||
ALLOY | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | OTHER IMPURITIES | Al | |
PER | TOTAL | ||||||||||
6005 | 0.6-0.9 | 0.35 | 0.10 | 0.10 | 0.4-0.6 | 0.10 | 0.10 | 0.10 | 0.05 | 0.15 | margin |
Mechanical Properties
MECHANICAL CHARACTERISTICS ≥ | ||||
Temper | TENSILE STRENGTH (M/PA) | YIELD STRENGTH (M/MP) | ELONGATION ( % ) | HARDNESS(HBS) |
O | 175 | 80 | 15 | / |
← No Information