The 5052 H32 aluminum alloy coil is an AL-Mg alloy aluminum coil. Magnesium is the main alloying element in the 5052 alloy aluminum coil.
Description
The 5052 H32 aluminum alloy coil is an AL-Mg alloy aluminum coil. Magnesium is the main alloying element in the 5052 alloy aluminum coil. It is the most widely used rust-proof aluminum. This alloy has high strength, especially fatigue resistance: plasticity and corrosion resistance High performance, can not be strengthened by heat treatment, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished.
Aluminum-magnesium alloys also contain small amounts of manganese, chromium, beryllium, titanium, and so on. Except for a small amount of solid solution, the manganese in the alloy forms MnAl6. The effect of chromium in 5052 aluminum alloy coil is similar to that of manganese. It improves the resistance to stress corrosion cracking, increases the strength of the base metal and the weld, and reduces the tendency of welding cracks, but its content generally does not exceed 0.35%.
Width(mm) | 20-2600 |
Thickness(mm) | 0.2-12 |
Alloy No. | 5052 |
Temper | O,H111,H112,H16,H32,H34,H38 |
ID | 76mm,152mm,200mm,300mm,505mm |
Packing | Export wooden pallets, wooden case |
MOQ | 5tons for each size |
Payment terms | LC,TT |
Delivery time | 25 days after 30% TT payment or receiving L/C copy |
Data Sheet --Chemical analysis
| CHEMICAL ANALYSIS (wt %) ≤ | |||||||||||
ALLOY | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | OTHER IMPURITIES | Al | |
PER | TOTAL | ||||||||||
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | 0.10 | / | 0.05 | 0.15 | The rest |
Data Sheet--Mechanical characteristics
| MECHANICAL CHARACTERISTICS > | ||||
Temper | TENSILE STRENGTH (M/PA) | YIELD STRENGTH (M/MP) | ELONGATION ( % ) | HARDNESS（HBS） |
H32 | 210-260 | 130 | 5 | / |
Kind attention : Specifications can be customized as the customer's requirements.